 The majority of customers, buyers Please note : As the photo shows, We can not guarantee that page shows the value of color and real commodity exactly the same color, understanding! |
|
 |
 |
|
Product Name:
Quick SH10A Moisture Analyzer |
Product Intro:
Principle and use of water is defined by the provisions of the sample under the conditions of drying after the loss of weight and the weight of sample before drying ratio, expressed in percentage. SC69-02C and moisture SH10A type detector is to balance the scales of quantitative infra-red light bulb placed in the direct radiation, the sample material by the infrared radiation of the heat wave, the rapid evaporation of free water, when the samples were free of water fully evaporated, or through the instrumentation on a direct reading of the optical system of the sample were the percentage of moisture content. SC69-02C moisture detector on the main plate by a single disc-type scales, infrared drying oven temperature control and electrical components and so on. It is fast drying, good reproducibility. Features easy to operate. Quick set-type water SH10A Miriam main dish from a single disc-type scales, infrared drying oven temperature control and electrical components and so on. It is fast drying, good reproducibility. Electric temperature control and the use of semiconductor thermistor temperature SCR lines, heating speed, temperature performance, and power grid voltage fluctuations, the impact of small changes in temperature. In addition, the apparatus is also equipped with a timer and alarm devices, easy to operate. SC69-02C and water-based SH10A Instrument for Rapid Determination of laboratory and industrial and mining enterprises of chemical raw materials, fuel, grain, minerals, biological products, food, pharmaceutical raw materials, paper, textile raw materials, finished or semi-finished products contained in the free water measured. The test apparatus relatively short time, and easy to operate, the requirements of the aquifer |
Details:
Technical parameters:
Model SH10A
Technical parameters SC69-02C
Temperature range of 60-140 ℃ ± 2 ℃ 60-170 ℃ ± 2 ℃
Heating time setting range 1-30min ± 10%
The largest weighing 10g
Differential sub-scale value 0.005g
The scope of differential scale readings 0-1g
Power supply and power consumption -220V/50Hz/260W
Diameter scales Φ100mm
Reading mode% [water] g [dry weight]
Dimensions 290 × 365 × 560 (mm)
Weight (Net) 12kg
Determination of water ± 0.2% accuracy
|
|
Product recommendation: